Search
Introduction
SP-300 is the top electrochemistry workstation(Electrochemical integrated test system)
EIS capability:7MHz
Application
-Fundamental Electrochemistry
-Sensors
-Corrosion
-Electrolysis
-Environmental Electrochemistry
-Biotechnology
-Electrosynthesis
-Electroplating
-Materials
-Nanotechnology
-Fuel cell
-Battery
-Solar cell
Techniques
Voltamperometric Techniques
-Open circuit Voltage(OCV), CV, CVA, CA, CP, LASV, ACV
Impedance Spectroscopy
-GEIS,PEIS,SGEIS,SPEIS(support Mott-Schottky)
Pulsed Techniques
-DPV, SWV, NPV, RNPV, DNPV, DPA
Corrosion
-LP, GC, CPP, CPT, DP, ZRA, ZVC, VASP, CASP
Technique Builder
-Modular Potentio/Modular Galvano
-Loop，Trigger In/Trigger Out
-Support kinds of techniques sequence measurement
Battery and Fuel Cell Testing
-Galvanostatic Cycling with Potential Limitation(1 to 5 of application technologies)
-Potentiometric titration
-Constant Load
-Constant power discharge
-Current Pulse
-GITT
-PITT
-I-V curves
Specification
-built-in EIS analyzer 10μHz to 7MHz
-Current Range：100pA-500mA、1μA-500mA、100pA-1A、1μA-4A option
-Voltage Range：+/-10V
-Resolution：300μV programmable down to 1μV by adjusting the dynamic range
-Data acquisition rate：1,000,000points/s
Update Option
-ULC Ultra low current modular：100pA(down to 1pA)
-Built-in EIS analyzer:10μHz-7MHz
-Interal amplifiers：1A/48V,4A/14V
-Bi-potentiostat
Unique Features
SP-300
is a state-of-the art research grade potentiostat/galvanostat/FRA with
remarkable sepcification. It is the newest benchmark in the Bio-Logic
product range, suitable for all the electrochemical field. It has
different testing functions, such as support for 7MHz electrochemical
impedance test, floating mode, the analog signals filtered, built-in
calibration module, and 9 stability bandwidths for a better control of
the cell. SP-300 chassis can be built in high current / high voltage
module (4A/14V or 1A/48V ), the user can also select a ULC ultra low
current module, particularly suited to the need for ultra low current
testing research. SP-300 can also choose two channels into a
bi-potentiostat. In addition, two channels of SP-300 allows two
different researchers conducted two different research test. SP-300 is a
powerful software package ( EC-Lab ®software ), have as many as 50 test
technology and a series of analysis tools, including
Levenberg-Marcquardt and Simplex algorithm EIS simulation, provides free
EIS database simulation software.
